|
The Quick Mill Andreja Preminum is the culmination of a long collaboration
between the internationally known Italian espresso machine manufacturer
and their U.S. distributor. We are proud to offer the newly improved Andreja Preminum espresso machine.
Andreja Preminum Upgrades Include:
Stainless Steel ConstructionAll of our Quick Mill espresso machines use only #304 food grade stainless steel, including the frame. Vacuum Breaker ValveNo vapor lock problems with this valve if you want to put your machine on a timer. 52 Watt Ulka Pump with Brass Ends and Thermal ProtectionHigher wattage pumps do not have to work as hard and produce less noise. Brass ends won't loosen up and develop leaks like less expensive 41-watt Ulka pumps with plastic ends. The pump has a built-in thermal overload protection couple mounted on the side of the pump coil, which will protect the pump by shutting it off in the event it runs too long and gets too hot. Second Magnetic SensorThis sensor gives you a low audible alert to let you know you will need to add water soon. You can finish the shot you are pulling and even do a couple more before the second sensor will kill power to the heater. Even if you fail to add water at this point, the second sensor only kills power to the heater and not the pump. Resettable Hi-LimitProtects the heating element. No fusible link that has to be replaced; just push down and it's reset. Easy Access Boiler Drain
We added a drain plug to the bottom of the boiler and increased the
size of the opening to the access port. This way, you can drain your
boiler completely for whatever reason. You can add a piece of silicone
tubing to the end of the drain plug and twist the plug open, making it
easy to drain into your sink or a bucket.
|
All of our Quick Mill espresso machines use only #304 food grade stainless steel, including the frame.
No vapor lock problems with this valve if you want to put your machine on a timer.
Higher wattage pumps do not have to work as hard and produce less noise. Brass ends won't loosen up and develop leaks like less expensive 41-watt Ulka pumps with plastic ends. The pump has a built-in thermal overload protection couple mounted on the side of the pump coil, which will protect the pump by shutting it off in the event it runs too long and gets too hot.
This sensor gives you a low audible alert to let you know you will need to add water soon. You can finish the shot you are pulling and even do a couple more before the second sensor will kill power to the heater. Even if you fail to add water at this point, the second sensor only kills power to the heater and not the pump.
Protects the heating element. No fusible link that has to be replaced; just push down and it's reset.